Hydrochrome® - Water Filter

This is our 4-Stage water cleaning solution for all your spray on chrome needs. It is vital that all the water that gets used to mix silver solutions is mineral free. This water filter will bring the mineral content of water down to 0.00- (the required range for use in silvering). This can be tested using one of our TDS meters

Our unit will produce the highest purity of water possible. RO alone will remove from 95% to 99% of contaminants, but that can still result in relatively high contaminant levels for sensitive environments.

One step further than RO alone, the DI component cleans up the remaining TDS left over after going through the membrane.

Stage 1
- 5 Micron Sediment Filter with a five micron rating. This is effective in removing dirt, rust and sand particles. This will catch all the larger particles in order to protect the later filters and membrane.

Stage 2 
- Granular Activated Carbon Filter Reduction of Chlorine, MT BE, Trihalomethanes, Pesticides, Herbicides, Benzene, Radon, and countless Volatile Organic Chemicals. It provides enhanced reduction of taste, odour, and colour.
– TFC- 190 Litre Reverse Osmosis Membrane

Stage 3

A thin film composite (TFC) top quality membrane that processes up to 50 gallons of pure water per day. It removes the following hard water contaminants that may be present in your water: lead, copper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate and selenium. 

Stage 4

A 250ml refillable DI cartridge to remove the remaining contaminants and lower the TDS to 0.

IMPORTANT INFORMATION

For details on how to use this product refer to the TDS.